Keep tabs on your home

Visit gives you full control of your home and is easily adapted to cater your needs. It offers cutting edge telephone and doorbell detection, reliable baby monitoring and fire protection that meets the highest standards.

Setting up the Telephone transmitter

• Remove the battery pull tab to start the unit.
  Remove the protective film from the Velcro.

• Paste the sensor on the wall.

• Connect the cables as shown below.

Additional Connection

• BE9024 Contact mat

  Remove the protective film from the Velcro.

• BE9023 Magnetic switch

  Doors / windows

• BE9253 Cable

  Doorbells / intercoms

• BE9251 MPS

  Mobile phones / tablets

• RJ11 input

  Analogue telephone

Handles any type of doorbell

The door transmitter
can be activated by:

• Internal microphone

• Electromagnetic detector

• External microphone accessory

• Existing doorbell via the Ext. trig

Setting it up – House

• Remove the battery pull tab to start the unit.
  Remove the protective film from the Velcro.

• Paste the transmitter to the left of the door chime.

Setting it up – Apartment

• Remove the battery pull tab to start the unit.
  Remove the protective film from the Velcro.

• Paste the transmitter to the left of the door chime.

• Connect the Ext. Microphone and attach it to the intercom’s speaker.

Setting up the Baby monitor

• Remove the battery pull tab to start the unit.

• Place it on a table or hang it on the wall, about 0.5–2 m from the baby
  Always keep it out of reach from the child.

Adjusting the settings

• If the baby monitor is not activated when the baby cries

  – increase the sensitivity.

• If the baby monitor is activated too easily

  – reduce the sensitivity.

• If the baby monitor is activated too fast or too slow

  – adjust the delay.

Setting up the Smoke alarm

• Connect the battery to the battery snaps to start the unit.

• Fix the baseplate to the ceiling using a screwdriver,
  > 50 cm from walls and other obstructions.

• Turn it clockwise to attach it to the baseplate.

Setting up the CO alarm

• Remove the mounting bracket from the CO alarm by turning it counter-clockwise.

• Fix the mounting bracket to the ceiling or wall using the supplied screws and plugs.

• Fit the alarm to the bracket by turning it clockwise until is snaps into place.

Using it as caller button

• Attach the lanyard to the unit.

• Hang the caller button around your spouse's neck.
  You can also mount it on a wall using the supplied adhesive.

Using it as
doorbell button

Flash Receiver

Alerts with bright flashes and colored lights. Features a rotating top so it’s easy to direct the light. Available with battery backup for full functionality even during power cuts.

Portable Receiver

Alerts with an adjustable sound signal and colored lights. Easy to use and wireless, so your client can bring it out in the garden. Lasts up to three years on standard batteries.

Pager Receiver

Alerts with gentle vibrations and colored lights. Small and lightweight, and can be carried in the pocket or on the belt. During the night, a bed shaker can be connected to the charger accessory.

Clock Receiver

Awakes you with sound, flashes and vibrations when it’s time to get up or when a transmitter is activated. Features battery backup and a night light that emits a mild blue glow.